KLR KLR.937, Manual

Page: 7 / 45

KLR.937 Revision: 2021-04-14
Serial numbe
rs: 2218 - beyond
6
4.0: INSTALLATION
4.1: DC Power supply
CAUTION

Electrification or electrocution hazard, only qualified
technician can perform these tasks.
When installing a KLR.937 ink jet printer, changing the power supply, or to troubleshoot a not
functioning ink jet printer. The power supply must be set to 28 volts rather than 24 volts. Follow these
instructions to set it properly:
Note: From KLR, the power supply setting will always be 28 volts regardless of what options on the
machine. But in fact, only the machine that uses an ink jet printer must be adjusted to 28 volts
1. Remove the back panel of the bag closing machine.
2. Turn ON the machine.
3. With a multimeter set to DC mod, probe the + and – from the output and use a terminal
screwdriver on the ADJUST screw.
4. Adjust the voltage until you reach 28 volts.