KLR KLR.937, Manual

Page: 6 / 45

KLR.937 Revision: 2021-04-14
Serial numbe
rs: 2218 - beyond
5
3.0: PRODUCT SPECIFICATION
3.1: Range of applications intended use and general functions
Used to print on clip, the inkjet printer KLR.937 is designed to be installed on the bag closer KLR.950. The
printer uses the interface of the KLR.950 to create convenient layout. These following values are in the
prototype version and are subject to change:
 Speed in excess of 60 packages a minute.

Uses the convenient touch screen (HMI) of the bag closing machine.

Uses an easy display to create many different layouts, can be fine tuned according to the user’s
needs.

Made of stainless steel and anodize aluminum.

Print automatically when loading the clips in the KLR.950 (if set in the parameters).
3.2: Dimensions (for transport)
Note : some parts are not assembled when the printer is sent alone.
Height: 5 inches
Length: 9.5 inches
Width: 5 inches
3.3: Specification for electricity
WARNING

Using another cable then the one provided by KLR can
damage the equipment and void warranty.
This machine is intended to be connected to the bag closing machine:
Electrical need: 28 Volts DC from the KLR.950 bag closer.
Provided in the packaging with the machine:
PE-95003-1
In case of loss, order from KLR to get a new one and be sure to have the cord as per requirement for
your machine.