klover DEA ECO 12, Manual

Page: 22 / 33

21
EN
G
LISH
M2-4 Weekend prog. Weekend timer Allows for enabling the weekend programme
Start 1st weekend Switch-on time first weekend programme
Stop 1st weekend Switch-off time first weekend programme
Start 2nd weekend Switch-on time second weekend programme
Stop 2nd weekend Switch-off time second weekend programme
M2-5 Exit Exit the programmable thermostat
M3 – LANGUAGE Ita Italian
Eng English
Fre French
Deu German
M4 – STAND-BY Stand-by Enable STAND-BY automatic switch-off
M5 – BUZZER Buzzer Enable acoustic signal in case of alarm.
M6 – FIRST LOADING First loading Perform brazier pre-loading after emptying the tank
M7
–
STOVE STATUS Stove status Verification of the stove's current status
Screw feed time on
Time out
Thermostat state
Flue gas temperature
Flue gas extractor speed
M8
–
TECHNICAL
CALIBRATIONS
Access key Menu reserved for Technical Assistance Centre
M9
–
EXIT Exit Exit from the user menu.
1. Menu M1
–
SET CLOCK
Allows for setting the current date and time.
2. Menu M2
–
SET TIMER
Sub-menu M2
–
1
–
ENABLE TIMER
Allows for globally enabling and disabling all programmable thermostat functions.
Sub-menu M2
–
2
–
DAILY PROGRAMME
Allows for enabling, disabling and setting the daily programmable thermostat functions.
Two operating time slots can be set according to the following table, where OFF signals the clock to ignore
the command:
DAILY PROGRAMME
MENU LEVEL SELECTION MEANING POSSIBLE VALUES
M2-2 Daily prog. Daily timer Enable daily programming ON
–
OFF
Start 1st day Switch-on time first daily programme Time – OFF
Stop 1st day Switch-off time first daily programme Time
–
OFF
Start 2nd day Switch-on time second daily programme Time – OFF
Stop 2nd day Switch-off time second daily programme Time
–
OFF
Sub-menu M2
–
3
–
WEEKLY PROGRAMME
Allows for enabling, disabling and setting the weekly programmable thermostat functions.
The weekly programmer has 4 independent programmes, the end effect of which combines the 4 individual
settings.
The weekly programmer can be completely activated or deactivated by setting ON or OFF respectively in the
menu shown in the table below:
MENU LEVEL SELECTION MEANING POSSIBLE VALUES
M2-3 Weekly prog. Weekly timer Enable weekly programming ON
–
OFF