background image

3. Installation of the 

mount 

arms to the rear panel of the screen

At least two qualified people should perform the assembly procedure. Personal injury and/or 

property damage can result from dropping or mishandling the display.

The wall structure must be capable of supporting at least five times the weight of the flat 

panel. Otherwise, the wall structure must be reinforced.

IMPORTANT: 

Maximum flat or curved panel weight:

2. WARNING!

Prior to installing this product, you must read all instructions thoroughly. Keep these 

installation instructions in an easily accessible location for future reference.

Safety measures must be practiced at all times during the assembly of this product. Use 

proper safety equipment and tools for the assembly procedure to prevent personal injury.

Klip Xtreme does not warrant against damage caused by the use of any Klip Xtreme mounts 

for purposes other than those for which it was designed or damage caused by unauthorized 

attachments or modifications, and is not responsible for any damages, claims, demands, suits, 

actions or causes of action of whatever kind resulting from, arising out of or in any manner 

relating to any such use, attachments or modifications.

Place your flat panel screen-side down on a soft, even surface, and identify the threaded 

mounting points that are located on the back of the flat panel.

Determine the correct screw size by carefully inserting a straw or toothpick, and mark the 

depth of the mounting point. Please note that not all the hardware included will be used.  

CAUTION:

 Verify the adequate thread engagement of the screw/spacer combination on 

your TV. Too short will not hold the TV and too long will damage the TV.

1.

2.

Attach the bracket arms to the flat panel by aligning the holes with the threaded 

inserts on the back of the display.  

3.

Too short

Correct

Too long

Standard flat panel 

mount 

installation

Max load

165lb

75kg

Label 

M-F

M-G
M-H

W-A

W-B

W-C

       Item

Rectangular washer 
Short round spacer
Long round spacer
Lag bolt
Concrete anchor
Metal flat washer

Quantity

4
8
8
6
6
4

Image

Summary of Contents for KPM-955








Reviews: