V. Optical digital and Auxiliary connections
1. Insert one end of the supplied Optical digital cable into the matching input jack
on the back of the soundbar, and the other end on the device you wish to play
audio from.
2. For Aux wired playback, connect one end of the supplied auxiliary cable to the
corresponding port on the soundbar and the other end to audio devices fitted
with a 3.5mm jack.
3. Plug the AC cable into a wall outlet.
4. Turn on the soundbar by pressing the
Power
button located on the right side
panel of the unit. You can also press the red
Power
button on the remote
control.
5. Select the input mode by pressing the
Mode
button located on the top panel.
6. Using the controls on the remote, you can manage and select your tracks,
increase or lower the volume, mute the soundbar audio, etc.
5. Drive the supplied screws into the holes with a screwdriver, leaving some
space between the head and the wall surface.
6. Make all the necessary cable connections before mounting the soundbar on
the screws (Aux. or Optical input cables).
7. Once all connections have been completed, carefully slide the soundbar over
the screws you just installed.
8. Now you can plug the AC cord of the soundbar into a wall outlet and the
soundbar is ready to use.
Summary of Contents for Aristos KSB-150
Page 1: ...KSB 150 Aristos...
Page 18: ...NOTAS NOTAS...
