background image

2

Tech Support:  

1-800-KLIPSCH

 

The lightning flash with arrowhead symbol, within an equilateral  

 

triangle, is intended to alert the user to the presence of 

 

uninsulated “dangerous voltage” within the product’s enclosure

 

that may be of sufficient magnitude to constitute a risk of electric

 

shock to persons.

 

Le symbole de l’éclair fléché dans un triangle équilatéral, a pour but 

 

d’avertir l’utilisateur de la présence non isolées d’une «tension 

 

dangereuse» dans le boîtier du produit que mai d’une magnitude 

 

suffisante pour constituer un risque d’électrocution pour les 

 

personnes.

 

The exclamation point within an equilateral triangle is intended  

 

to alert the user to the presence of important operating and  

 

maintenance (servicing) instructions in the literature 

 

accompanying the appliance.

 

Le point d’exclamation dans un triangle équilatéral sert à alerter 

 

l’utilisateur de la présence d’importantes exploitation et de 

 

maintenance (entretien) dans la documentation accompagnant 

 

l’appareil.

 

Caution marking is located at the side of the apparatus.

 

Attention marquage est situé sur le côté de l’appareil.

CAUTION:  

Risk of Electrical Shock - Use in Dry Locations Only

ATTENTION: 

Risque de Choc Électrique - Utiliser Seulement Dans des Endroits 

Secs 

CAUTION: 

To reduce the risk of electric shock, do not remove cover (or back). No 

user servicable parts – refer servicing to qualified service personnel only.

ATTENTION: 

Pour réduire le risque de choc électrique, ne pas retirer le 

couvercle (ou l’arrière). Non utilisateur servicable parts - confier l’entretien de 

service qualifie seul le personnel.

WARNING: 

To reduce the risk of fire or electric shock, do not expose this 

apparatus to rain or moisture.

AVERTISSEMENT: 

Pour réduire le risque d’incendie ou de choc électrique, ne 

pas exposer cet appareil sous la pluie et l’humidité.

Summary of Contents for LightSpeaker 5

























Reviews: