Klippan KISS 2, Manual

Page: 13 / 19

13
ADJUSTING THE LENGTH OF HARNESS
13 – 14 By adjusting the loop, you get some more length on the webbing.
ADJUSTMENT OF SHOULDER BELTS
15. Release the belts from the bracket
16. Move the belts to new height
17. Reattach the belts to the bracket
NB!!! Make sure that the belts have not twisted together and that the belt loopsare properly fastened in the
bracket. If the shoulder belts are too short for the child, release the front belt loop from the plastic shell by
twisting it out
FITTING USING THREE-POINT BELT
18. Push the belt out and put it into the lap belt guides
19. Lock the belt and thread the belt into the guide
20. Thread the belt into the lover belt guide
21. Thread the belt into the upper belt guide and tighten the seat belt properly. Make sure that the belt
keeps the seat on place
COVER DETACHMENT
22. Release the rubber band from the handles.
23. Release the cover and sleeves from the seat
24. Release the belts from the bracket
WASHING
Wash the entire seat occasionally using a mild detergent and warm water. Do not use detergents containing
bleaching agents.