User's Manual
K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2017
Version 6.5
Page 43 of 69
14.1
Setup instructions for a cardioid array
To achieve a cardioid or hypercardioid pattern, you must always have an array with 3
subwoofers - or a multiple of 3 subwoofers - setup next to one another (3, 6, 9, etc.). In
this set of three, the middle one must be stacked or flown rear-facing while both other
subwoofers are front-facing.
The subwoofer and the flying frame SEQUENZA 10 allow for these setup options with their
given design. You can stack the subwoofers even when they are facing opposite directions,
and you can connect them to front-facing systems.
There is an additional SpeakOn connector on the front grille so that you can connect the
cables to the rear-facing side of all subwoofers in a cardioid array.
You can choose from the following options for cardioid and hypercardioid setups:
3 x SEQUENZA 10 B horizontal
3 x SEQUENZA 10 B vertical
3 x SEQUENZA 10 B stacked
Summary of Contents for SEQUENZA 10
Page 2: ......
