Klimawent
– the warranty of highest quality at attractive price
23.05.2019
Reel Exhaust Extractor
ALAN-U/C-HD-N
5 z 8
2
.
Protect the hose reel from uncontrolled back reeling and set it in such a position, as convenient for installing
the hose assembly.
3
.
Put the hose assembly inside the reel
– screw up the reducer to the reducer body with 2 screws (Fig. No.3).
4
.
Put (sleeve on) the rubber stopper on the hose and secure it with a hose clamp
– in a distance of 2 metres
from free end.
5
.
Install the nozzle at the hose end, fasten it with a hose clamp and secure it with a rubber clamp cover.
6
.
Pull gently the hose to release the reel blockade, so it is easy to turn slowly the reel and the hose assembly is
winding smoothly onto the reel
– finally the rubber stopper ends the winding.
Fig. No.3
– Hose assembly – installing
HOW TO INSTALL THE EXTRACTOR AT THE WORKPLACE
Reel Exhaust Extractor can be mounted under the ceiling or to the wall/column, by means of wall brackets.
It is
important that the reel axle is levelled horizontally
. For installing use bolts M12 class 5,6. Prior to installing
check the load carrying capacity of the building structure and the strength of floors. The optimum installing height
of the extractor is 3,0 up to 3,5 metres.
Installing the Reel Exhaust Extractor at the workplace
:
1
. Lift the completely assembled extractor to appropriate height and fasten it to the ceiling or wall in a prepared
place (CAUTION: weight of the extractor can reach above 100 kg).
2
. Several times: check reeling / unreeling of the hose assembly and pay attention that the hose is evenly wound
(distributed) onto to reel.
3
. In case when necessary, slide up or down the rubber stopper on the hose or adjust the reeling speed.
These adjustments are described in the next section.
Fig. No.4
– Mounting positions of the reel extractor at the operational place