Klimawent
– the warranty of highest quality at attractive price
25.01.2021
Ozone generator KILLVIR-48
7 of 12
TROUBLESHOOTING GUIDE
Table 3 Typical disturbances and remedies
Disturbances
Possible causes
Remedies
The device does not turn on
Incorrectly connected or damaged
power cord
Check and correctly insert the
cable into the device and power
socket
The device turns on,
but the fan is not running
Blocked or broken fan
Contact the manufacturer
KLIMAWENT S.A.
The device turns on but
produces no ozone
Blocked or damaged fan or ozone
generator
Contact the manufacturer
KLIMAWENT S.A.
MAINTENANCE AND RECYCLING INSTRUCTIONS
Maintenance
The design of the device enables continuous operation provided it is properly used and does not require
maintenance from the user. All repairs and maintenance are performed by the manufacturer or his representative.
Recycling and cassation
! CAUTION
When the product is transferred for cassation, the provisions on the erasing of machines
withdrawn from use and/or recycling of waste should be applied. No part of the
construction of the device belongs to the hazardous waste group.
OHS MANUAL
! CAUTION
The device, according to the definition, is a machine and meets the safety requirements
of Directive 2006/42/EC and does not require additional safeguards for safe use, but
requires careful use and compliance with the operating procedure - see 7 – OPERATION
and 13 – RESIDUAL RISK INFORMATION!
Use personal protective equipment and protective clothing while operating the working
device! The KILLVIR-48 ozone generator should be used in compliance with the safety
and hygiene regulations! Ozone is an agent with strong biocidal, antiseptic and oxidizing
properties and, at the same time, is harmful to human health, also in the form of ozone
treatment residues.
Start-up and operation of the device may only take place after reading these
instructions. The device is not dangerous if it is handled according to this manual!
The device has a plug socket with a grounding pin and a cable with a grounding plug.
The device must only be connected to a 230V, 50Hz earthed socket!
Ozone must not be used in the environment of flammable gases or explosives, because
Ozone is a highly oxidizing compound!