FIRE DAMPERS
366
367
Design changes reserved
Digital controller K-M200
•
Digital controller K-M200 to control and monitor up to 200 motorized fire dampers and
200 smoke detectors
•
Pre-programmed for fire safety application
•
No programming knowledge necessary! Simple parameterisation through touch screen or
remote access via web browser
•
Communication: Modbus RTU (RS-485) to the K-FC24’s / K-UFC24’s and the internal
I/O’s, TCP / IP (Ethernet RJ45) for remote access or combining multiple units. Integrated
IP-address
•
Automatic test of the whole system including test report
FIRE
ALARM
M
odbus
Digital controller K-M200
1
... 50
24 V AC
FIRE
ALARM
M
odbus
...50
1
24 V AC/DC
24 V AC/DC
Digital field controller
K-FC24
Universal digital field controller
K-UFC24
Digital controller K-M200
System overview
FIRE DAMPER CONTROL
Controller /
Building Management Level
Cabinet Level
Field / Damper Level
Digital field controller K-FC24
•
Digital field controller to control and monitor up to 4 motorized fire dampers and 4 smoke
detectors
•
Communication: Modbus RTU (RS-485)
•
The safety function of the connected devices is not affected when communication with
Modbus is interrupted
Universal digital field controller K-UFC24
•
Universal System Link between motorized fire or smoke extraction dampers and any Mod-
bus or BACnet system or analog control
•
Controls and monitors max 2 fire or smoke extraction dampers as well as 1 smoke detec-
tor and 1 thermoelectrical tripping device
•
The Universal Field Controller offers 3 different control modes (to be chosen through dip
switch terminals) :
•
Fire or smoke extraction application
•
Bus protocols: Modbus (RS-485) or BACnet (Ms/Tp)
•
Analog: Input and output signals
•
Easy to install thanks to the mounting bracket which can be pre-installed. The UFC24 can
be snapped on any time during the project
•
Easy and clear indication of function, position and status with LEDs
•
Independent functional control through test key at any time
