KlikAanKlikUit Trust 71169, User Manual

Page: 3 / 27

COMPATIBILITY
The contact sensor works with the Z1 ZigBee Bridge and the ICS-2000.
1. (RE)PLACE THE BATTERY
A
Remove the backplate from the contact sensor.
B
Open de battery cover using a flat screwdriver.
C
Place the included CR2032 battery in the contact sensor. Note the positive
and negative polarity in the compartment. Close the battery cover.
2. INDICATORS
The contact sensor contains a LED indicator (This is not a button) to show the
status of the contact sensor. Please see below the meaning of the different
LED indications.
LED FUNCTION TABLE
Connection mode LED will flash once per second
for approximately 1 min.
Connected successfully LED will stop flashing
Sensor reset LED will flash fast
Sensor triggered (When the sensor is
opened for more then 10 mm)
LED will flash once
A
B
C
A
A
B