Klever Y Muse 45, User Manual

Page: 34 / 39

www.klever-mobility.com www.klever-mobility.com 66 67
Data Data
14. Technical data Klever Y Muse 45
Colour LCD Display
Illuminated colour LCD-display, with starter & motor immobiliser and acoustic alarm
5 levels of electric motor support: N – ECO – TOUR – MAX - TURBO
Bicycle computer: current speed, range, trip, km-day, time, Kcal, odo, cadence
TURBO button for: walk-assist/ acceleration at standstill without pedalling / while pedalling
Battery state of charge SOC with 5 bars (each bar representing 20% battery capacity)
Ambient light sensor
Actuation of buttons confirmed with acoustic beep
Rechargeable 850 Wh battery
Lithium-Ion
44,4 V/ 19.1 Ah/ 850 Watthour/ 5.5 kg.
State of charge indicated by LED: < 35% red / 35 – 75% yellow / > 75% green
Allowable discharge temperature: -20°C – +50°C
Allowable storage temperature (12 months): -20°C – +25°C; (o5°C – +20°C)
Allowable charging temperature: -5°C – +45°C (o5°C – +20°C)
Lockable and detachable
Charging time: 850 Wh with 6A charger 3.5 hours
Place of charging: on or off Y Muse 45
Charging cycles: 700 (one complete charging is cycle is 0 – 100% capacity)
Range: 850 Wh 75 – 165 km., under average conditions 100 km.
Lifetime: after 2 years of 700 complete cycles at least 60% of the original capacity still remains.
600 Watt Motor
Brushless DC motor in the rear hub
Control through torque sensor in the frame dropout and speed sensor in the bottom bracket
Output power – torque: 600 Watt – 49 Nm.
Operating voltage: 44.4 V
Electric motor support: until maximum 45 km/h.
Weight: 5.6 kg. – 600 Watt
Standard 6A charger
Input voltage: 200 – 240 V; 47 – 63 Hz
Output voltage: 48 V
Maximum charge current: 6A
Output power: 288 Watt
Size: 225 x 100 x 40 mm. – 6A
Weight: 1,3 kg.
Recommended tightening torque for bicycle components
Head set Clamp bolt steerer tube 1 x M5 Allen key 4 mm. 5.5 Nm.
Stem
Clamp bolt handlebar 2 x M5 Allen key 4 mm. 5.5 Nm.
Clamp bolt steerer tube 2 x M6 Allen key 6 mm. 9.5 Nm.
Clamp bolt adjusting stem
angle
1 x M8 Allen key 6 mm. 25 Nm
Brake lever Clamp bolt handlebar 1 x M5 Allen key 4 mm. 5.5 Nm.
Reach brake lever 1 x M6 Allen key 3 mm. -
Grip Clamp bolt handlebar 1 x M5 Allen key 3 mm. 5.5 Nm.
Display Clamp bolt handlebar 1 x M5 Allen key 4 mm. 3.0 Nm.
Actuator horn Clamp bolt handlebar 1 x M4 Allen key 3 mm. 3.0 Nm
Wing mirror Clamp bolt handlebar 1 x M5 Allen key 4 mm. 5.5 Nm,
Shifter Clamp bolt handlebar 1 x M5 Allen key 4 mm. 5.5 Nm.
Head light Mounting bolt 1 x M5 Allen key 4 mm. +
8 mm. open wrench 5.5 Nm.
Seat post Mounting bolt saddle 2 x M6 Allen key 5mm. 9.5Nm.
Seat post clamp Clamp bolt seat post 1 x M6 Allen key 6 mm. 9.5Nm.
Front wheel Thru-axle 1 x M15 QR-lever. 20 Nm.
Brake calliper Mounting bolt 2 x M6 Torx 25 9.5 Nm.
Disc rotor Mounting bolt 6 x M5 Torx 25 5.5 Nm.
Fender stay Clamp bolt fork leg 1 x M4 Allen key 2,5 mm. 3.0 Nm.
Front fender Mounting bolt front fork 1 x M4 Allen key 3 mm. +
8 mm. open wrench 3.0 Nm.
Ring lock Mounting bolt seat stay 4 x M5 Allen key 3 mm. 5.5 Nm.
Luggage rack Mounting bolt 4 x M5 Allen key 4 mm. 5.5 Nm.
Rear wheel Hex nut 12 mm. as 19 mm. box key &
open wrench
40 Nm.
Kickstand Mounting bolt 2 x M6 Allen key 4 mm. 9.5 Nm.
RH pedal RH threading 9/16” x 20 TPI 15 mm. open wrench 40 Nm.
LH pedal LH threading 9/16” x 20 TPI 15 mm. open wrench 40 Nm.
Crank set Mounting bolt 1 x M15 Allen key 8 mm. 40 Nm.
Mounting bolt cover Allen key 10 mm. 5.5 Nm.
Derailleur Mounting bolt 1 x M10 Allen key 5 mm. 9.5 Nm.
Mounting bolt cable 1 x M5 Allen key 4 mm. 5.5 Nm.
Motor cable Mounting bolt 1 x M5 Allen key 4 mm. 5.5 Nm.
Recommended tightening torque for standardised metrical hexagon headed bolts
(quality grade 8.8)
Bolt M3 M4 M5 M6 M8 M10
Nm. torque 1.3 3.0 6.0 10.0 25 50