background image

HOW MANY HOSE SECTIONS DO I NEED?

IMPORTANT: 

The pump must be on when you check the hose 

length. The hose contracts when the pump is operating and will 
look longer than when the pump is off. 
Position the Sprinta at the far end of the pool from the skimmer 
box. It is easy to position the Sprinta in the pool by moving it 
about with your pool brush. 

The Sprinta’s hose should ONLY be long enough to 
reach to the end of the furtherest corner of the pool. 
Too much hose will hamper your Sprintas movement.

Save any spare hose sections for use as future replacements.

TWIN VALVE AUTOSKIM

 

The unique 

automatic “Autoskim” Skimmer valve and 
vacuum plate combination ensures full 
surface skimming of all fl oating leaves 
and debris. 

“Autoskim” is available as an 

optional extra with the Klever Kleena Sprinta.

AUTOSKIM INSTALLATION 

A Kreepy Krauly Auto Skim (black spring) Combination 
Vac/Plate Skim Valve is recommended for superior 
performance and continued maximum surface 
skimming. Pools with high fl ow pump and fi lter systems 
are recommended to use a Kreepy Krauly Auto Skim 
(black spring) combination Vac/Plate Skim Valve.

nt 

How to Connect your Hose

Connect Male to Female

Male

Female

SPRINTA

-free so as not to 

roceeding:

CONNECTING YOUR SECTIONAL HOSE

ssembly of the sectional hose by dampening the hose ends with water and connecting a 

he male end of the previous section for all sections with the male and female end. Allow 

ns to fi ll with water before connecting the next section. The fi nal Sectional Hose to be used 

pecial male-male hose section which is used to connect to your KleverKonecta.

r pool depth is over two metres, install the hose weight approximately three metres 
er. The hose weight provided may not be necessary in shallow pools.

r optimum cleaning performance, we recommend that you use Klever Kleena or 

sectional hose. We cannot guarantee the performance of the Sprinta using your 

al or continuous hose.

STEP 4

  CONNECTING YOUR CLEANER

Connect the KleverKonecta to the Sprinta and place Sprinta in the water 
and allow it to fi ll with water before connecting the KleverKonecta to the 
special male-male hose. 

Your Sprinta is now ready to be used. Congratulations.

DO YOU NEED A HOSE WEIGHT?

A hose weight is 

ONLY

 required for extremely deep pools (at least 2.5 

metres deep).
DO NOT USE a Hose Weight as it may interfere with the operation of 
your Sprinta. Your Sprinta has been weighted to compensate for the 
buoyancy in the hose.  

How to Connect 
your KleverKonecta

Male

KleverKonecta

+LEVER

+ONECTA

+LEVER+LEENA

&LEXIBLE(OSE#ONNECTOR

+LEVER+ONECTA

Special Male-Male Hose

This Special Male-Male hose has 
two male connectors and is used to 
connect to your KleverKonecta

ATTENTION POOL BLANKET OWNERS

When a Pool Blanket is in use, carefully monitor your chlorine or salt 
water chlorinator settings to avoid over chlorinating your pool which may 
damage your Sprinta and void your Warranty.
The Pool Blanket prevents chlorine evaporating reducing the need to add 
more chlorine. If you have a salt water chlorinator remember to lower the 
amount of chlorine produced when the pool blanket is in use. 
If you have any questions please call our Customer Service department 
on 1800 777 255 or your local pool shop professional.

1571_Sprinta_A2_Install_Doc(col).indd   2

8/07/10   1:46 PM

STEP 3

   CONNECTING YOUR SECTIONAL HOSE

Complete the assembly of the sectional hose by dampening the hose ends with water and connecting a 
female end to the male end of the previous section for all sections with the male and female end. Allow 
the hose sections to fi ll with water before connecting the next section. The fi nal Sectional Hose to be used 
should be the special male-male hose section which is used to connect to your KleverKonecta.

NOTES: 

If your pool depth is over two metres, install the hose weight approximately three metres 

from the cleaner. The hose weight provided may not be necessary in shallow pools.

WARNING: For optimum cleaning performance, we recommend that you use Klever Kleena or 
Kreepy Krauly sectional hose. We cannot guarantee the performance of the Sprinta using your 
existing sectional or continuous hose.

1571_Sprinta_A2_Install_Doc(col).indd   2

8/07/10   1:46 PM

Reviews: