Klenn Air Horns JL-JK-OBA, Installation Manual

Page: 8 / 35

JL-JK-OBA
Installation and Operation Manual
Go to Table of Contents PG 8/35 REV: A (1/21/2019)
4. Application Chart
4.1. 100% Direct Bolt-On Vehicle List
JL-JK-OBA is a 100% direct bolt-on aftermarket product for Jeep vehicles listed in below chart; every effort has
been made to verify correct fitment on these vehicles in their factory, non-modified conditions.
MODEL YR MODEL DRIVE ENGINE BODY TRIM
2018-2019 JLU ALL 3.6L** 4 DOOR ALL**
2007-2018 JKU ALL 3.6L 4 DOOR ALL**
NOTE: All vehicles listed may require drilling holes for ground wires and installing switches, based on
preference of installed switch locations and wire grounding points.
4.2. **Excluded Vehicles
JL-JK-OBA is NOT compatible with following JEEP vehicles:
4.2.1. ALL 2-Door Jeep JL
4.2.2. ALL 2-Door Jeep JK
4.2.3. Jeep JLU with 3.0L Diesel
4.2.4. Jeep JLU with Hybrid
4.3. Aftermarket Product Compatibility
4.3.1. This kit has been designed and tested to be compatible with leading manufacturers of
aftermarket truck steps, such as Amp Research Power Steps ® and all OEM standard and optional
steps.
4.3.2. This kit has NOT been designed or tested for use with leading manufacturers of aftermarket
exhaust systems.
4.3.3. This kit has NOT been designed or tested for use with leading manufacturers of aftermarket
drivetrains, or suspension systems.