JL-JK-OBA
Installation and Operation Manual
PG 11/35
REV: A (1/21/2019)
6.
List of Tools and Supplies
6.1.
Standard Tool List (Required)
6.1.1.
Basic mechanic’s 3/8” drive socket sets with extensions
•
Inch Size Sockets (1/4” –
1” Hex)
•
Metric Size Sockets (6mm
–
20mm Hex)
6.1.2.
Basic mechanic’s combination wrenches (box/open
-end)
•
Inch Size Wrenches (1/4” –
1” Hex)
•
Metric Size Wrenches (6mm
–
20mm Hex)
6.1.3.
Basic mechanic’s screwdriver set (Philips, Flat Head)
6.1.4.
Diagonal Cutter/Wire Cutter Pliers
6.1.5.
Wire Strippers
6.1.6.
Wire Terminal Crimpers
6.1.7.
Slip-Joint Pliers
6.1.8.
Utility Knife, or Utility Razor blade
6.1.9.
Magnetic retrieval tool
6.2.
Special Tool List (Recommended)
6.2.1.
10-100 ft.-lb. torque wrench
6.2.2.
20-150 in.-lb. torque wrench
6.2.3.
Multi-Meter for 12V DC electrical systems, or equivalent
6.2.4.
12V DC Test Light, or equivalent
6.2.5.
Trim Panel Tool, for removing wiring push pins
6.3.
Shop Consumables List (Recommended)
6.3.1.
Quality Electrical tape
6.3.2.
Di-electric grease for electrical connections
6.3.3.
Heat Shrink tubing for electrical connections
6.3.4.
Blue Loctite (i.e., Loctite PN 242), or equivalent
6.3.5.
Sand Paper, or Wire Brushes for installing ground wires
6.3.6.
Extra plastic zip ties > 6” long
6.3.7.
Extra NPT sealant (i.e., Kleinn Air Horn Juice, Teflon tape, etc.)
6.3.8.
Touch-up paint for frame/chassis
6.3.9.
Typical cleanup supplies
