19
SECTION 3 MENUS
3.1 Instantaneous Measurements
Instantaneous measurement menus and the menus showing their related maximum,
minimum and demand values are provided in the following table. As provided in the
table, down, up, right and left handside buttons provide menu switches.
Example of Reactive
power display for LCD
devices
Example of Reactive
power display for
7-segment devices
Fig. 3-1 Example of instantaneous measurement page (Reactive power)
“- - - -“ icon which appears in the menus showing instantaneous measurement refers
to the value being higher than 99 999 999 For Powys 1023, shown in 9 999 999.9 kWh
/ kVArh format.
3.2 Maximum, Minimum and Demand Values
Minimum and maximum values of the voltage, current, frequency, CosØ, power factor,
active power, reactive power, apparent power, THDV and THDI parametres as well as
the demand values of current, active, reactive and apparent power are calculated by
the device and stored in the permanent memory. Right or left handside buttons in the
measurement menus display the maximum, minimum measurements and demand
values. Menu switches are shown in the Table 2.
The values stored in the memory may be selected from the “CLEAR” menu located in the
“SETTINGS” menu to be erased. Furthermore, resetting is also possible via resetting or
restoring the factory settings commands for devices with RS-485 communication
SECTION 3 MENUS
Summary of Contents for POWYS 1012
