30
Baudrate (bAud):
Refers to the signal rate used in communication in terms of “baud”. Communication rate may be
modified within the range of setting.
Slave ID (Id):
RS485 communication works based on the communication of one master and one or more than
one slave devices. POWYS responds to the queries made by the master as a slave in the RS485
communication. The slave rank of the device in this communication may be set in the Slave ID
menu.
Parity Control (PrtY):
It is a mechanism controlling the data accuracy, which is commonly used in communication. It
works based on the principle of counting “1” within the binary data. It has “even” or “odd” parity
control methods. In order to communicate, master and slave devices have to use the same
method. The method of your choice is selected in this menu or parity control feature is turned off
by selecting the “NONE” option.
3.13 Digital Output Settings (Dig Out)
(ATTENTION! : This menu is only valid for devices with digital output.)
This menu enables to turn on/off and to select the type of the digital outputs. See the menu tree
for table 4 and table 6 for the step ranges.
Digital output type (tYPE):
• Option to assign to the pulse output (PULSE) : In order to use the related output as
pulse output, this option has to be selected first.Then, the necessary settings out of
pulse output settings can be adjusted so that the pulse output is activated.
• Option to assign to the low alarms (LOW ALM) : If this option is selected as a digital
output type, in case of a preset low alarm, the related output is activated.
• Option to assign to the high alarms (HI ALM) : If this option is selected as a digital
output type, in case of a preset high alarm, the related output is activated.
3.14 Pulse Output Settings (Pulse)
This menu enables the on/off position of the pulse outputs, output parameter, pulse duration
and step range settings. Settings for both of pulse output may be adjusted independently of
each other. See table 4 for the menu tree and table 6 for the setting ranges.
Pulse output is activated at every increase as much as the step range of the output parameter
that is adjusted and remains in this position for as long as the adjusted pulse duration and then
is disabled.
SECTION 3 MENUS
Summary of Contents for POWYS 1012
