OM•Wi
MAINTENANCE
BATTERY REPLACEMENT
When the LOW alert@ and HIGH alert@lights are illuminated at the
same time, the batteries must be replaced.
1
.
Loosen screw and remove
battery door@.
2. Remove battery cartridge®
from battery compartment.
Note orientation.
3. Remove and recycle
4 spent AAA batteries.
4. Install 4 new AAA batteries into
cartridge, noting proper polarity.
5. Place battery cartridge back into the
battery compartment, al
i
gn
i
ng the
leads (fits only one way).
6. Replace battery door and tighten screw securely.
SENSOR SERVICING
When ALL l
i
ghts on the tester©,@,®,
(J)
,
® are illuminated, the
sensor@has failed and the unit must be serviced. Contact Klein Tools
at 1·800-553-4676 or [email protected] for further
details.
There are
no
user-serviceable parts inside tester.
CLEANING
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth.
Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when the tester
i
s not in use for a prolonged
period of time. Do not expose to high temperatures or humidi\y.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow ttie tester to
return to norma
l
operating cond
i
tions before using.
WARRANTY
www.kleintools.com/warranty
DISPOSAL/ RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with
local regulat
i
ons. Please see www.epa.gov or
-
www.erecycle.org for additional information.
6
