Klein Marine Systems, Inc. HydroChart 5000, Operation And Maintenance Manual

Page: 8 / 82

viii
HydroChart 5000 Sonar Operations and Maintenance Manual P/N 11210080, Rev. 02
List of Figures
Figure 1-1:
HydroChart 5000 Sonar System Topside System Main Components . . . . . . 1-4
Figure 1-2:
HydroChart 5000 Sonar System Sonar Head Unit . . . . . . . . . . . . . . . . . . . . 1-5
Figure 1-3:
HydroChart 5000 Sonar System Sonar Head Unit Block Diagram . . . . . . . 1-7
Figure 1-4:
Deck Cable Connector—at Sonar Head Unit . . . . . . . . . . . . . . . . . . . . . . . 1-8
Figure 1-5:
HydroChart 5000 Sonar System TPU Electronics Block Diagram . . . . . . . 1-9
Figure 1-6:
HydroChart 5000 Sonar System TPU Electronics Chassis . . . . . . . . . . . . 1-10
Figure 3-1:
Sonar Head Unit Mounting Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Figure 3-2:
FWD and Arrow Labels on the Sonar Head Unit Mounting Flange . . . . . . 3-4
Figure 3-3:
Sonar Head Unit Eye Rings and Handles . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Figure 3-4:
TPU Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Figure 3-5:
SonarPro Workstation Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Figure 3-6:
TPU Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Figure 3-7:
SonarPro Workstation Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Figure 4-1:
Removing the Phillips Head Screws from the Top of the Fairing . . . . . . . . 4-3
Figure 4-2:
Removing the Skid Plates from the Frame . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Figure 4-3:
Removing the Phillips Head Screws from the Bottom of the Fairing . . . . . . 4-4
Figure 4-4:
Removing the Socket Head Cap Screws that Secure the Transducers to the
Frame
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Figure 4-5:
Fairing Halves Separated from the Frame . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Figure 4-6:
Disconnecting the Cables from the Sonar Electronics End Cap . . . . . . . . . 4-6
Figure 4-7:
Sonar Electronics Housing with all the Cables Disconnected . . . . . . . . . . . 4-6
Figure 4-8:
Removing the Altimeter Transducer from the Frame . . . . . . . . . . . . . . . . . . 4-7
Figure 4-9:
Removing the Socket Head Cap Screw that Secures the Sonar Electronics
Housing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Figure 4-10:
Sliding the Sonar Electronics Housing out of the Frame . . . . . . . . . . . . . . . 4-8
Figure 4-11:
Sonar Head Unit Fully Disassembled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Figure 4-12:
Tightening the Socket Head Cap Screws in the Electronics Housing
Connector End Cap
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9