Klein Marine Systems, Inc. HydroChart 5000, Operation And Maintenance Manual

Page: 61 / 82

Disassembling and Reassembling the Sonar Head Unit
4-7
10. If it is required to remove
the altimeter transducer, use
the 4-mm hex key to remove
the two M5 x 20 mm socket
head cap screws that secure
it, and then let the transducer
rest inside the frame
temporarily.
11. Using the 4-mm hex key,
remove the M6 x 12 mm
socket head cap screw that
secures the sonar
electronics housing to the
angle bracket on the frame.
Figure 4-8:
Removing the Altimeter Transducer
from the Frame
Altimeter
transducer
Figure 4-9:
Removing the Socket Head Cap
Screw that Secures the Sonar Electronics
Housing
Sonar electronics
housing
Angle
bracket