4-8
CHAPTER 4 Equipment Maintenance
HydroChart 5000 Sonar Operations and Maintenance Manual
P/N 11210080, Rev. 02
12.
Slide the sonar electronics
housing completely out of
the frame.
13.
Remove the jumper cable,
and if the altimeter
transducer was freed,
remove it also along with
the altimeter cable.
The Sonar Head Unit is
shown fully disassembled
in Figure 4-11. The
jumper cable is not shown.
Figure 4-11:
Sonar Head Unit Fully Disassembled
Figure 4-10:
Sliding the Sonar Electronics
Housing out of the Frame
Frame
Altimeter
transducer
and cable
Sonar electronics
housing
Transducer (2)
Skid plate (2)
Fairing (2 halves)
Summary of Contents for HydroChart 5000
