User Manual
Klegg Electronics Inc.
24
www.klegg.com
7.6 Using bound devices
After binding, you can mount the bind as a usual NDAS
devices. But you need to format the devices to use. To do
so, select any one of the Bound NDAS device and Mount
(Read/Write). "Found New Hardware Wizard" may appear.
Click Next and proceed in finishing the wizard. And please
format the new NDAS bind according to "
Chapter 9 For-
matting NDAS devices.
"
In some cases, "Mount (Read/Write)" and "Mount (Read-
only)" menu can be disabled. This means that the bind is
not in mountable status. You can check further informa-
tion at "Properties" menu and NDAS Bind Management.