12
INSTALLATION
CAUTION:
THIS APPLIANCE MUST BE INSTALLED BY A PROFESSIONAL
ELECTRICIAN, AND IN ACCORDANCE WITH THE
MANUFACTURER’S INSTRUCTIONS
BEFORE CARRYING OUT ANY ADJUSTMENT OR REPAIR ON
THE APPLIANCE, MAKE CERTAIN IT IS DISCONNECTED
FROM THE ELECTRICAL POWER SUPPLY
Statutory regulations, technical standards, directives
The appliance must be installed in conformity with current statutory regulations and in
accordance with applicable safety standards.
Installing the oven
The unit in which the oven is installed must be manufactured to a modular dimension of
600mm.
Openings at least 50 mm deep must be cut both in the bottom and in the top of the unit to
ensure adequate ventilation (see figure
1 for essential dimensions).
During assembly, particular care must be taken not to pick up the oven by the door.
As a
general rule, the oven door should never be forced or subjected to undue stresses.
!
