23
W
hat to do in case of malfunctions?
WHAT SHOULD
YOU DO?
POSSIBLE
CAUSES
Your display does not light up
Water or steam leak around
the door during cooking.
- Oven is not connected to
power source.
- Electronic board is not
functioning.
- Check that the appliance is
receiving electricity (good fuse).
- Call the After-Sales Service
Department.
- The door is not properly
closed.
- The door seal is defective.
- Call the After-Sales Service
Department.
The steam oven does not
work.
- A power supply problem.
- The electrical system is faulty.
- Put the plug into the plug socket.
- Check the cut-out.
- Call the After Sales Service
Department.
Water or steam comes out of
the appliance.
- The door is not properly
closed.
- The door seal has come away
from its support.
- The door seal is faulty.
- Close the door properly.
- Correctly insert the seal into its
support.
- Call the After Sales Service
Department.
There is residual water in the
oven cavity on the inner door
and the door seal.
This is normal.
Dry with a cloth.
The drip channel fills with
water after every cooking
session.
- The seal on the tank is faulty.
- The seal on the door has
come away from its support.
- The seal on the door is faulty.
- The door is sloping.
- Replace the seal.
- Correctly insert the seal into its
support.
- Call the After Sales Service
Department.
- Call the After Sales Service
Department.
The light on the oven cavity
does not work.
The light is faulty.
Replace the light.
YOU OBSERVE
THAT…
In all circumstances, if your efforts are not sufficient,
contact the After-Sales Service Department without delay.
Copy here the details that are on your oven manufacturer's plate:
H
ow to contact us?
MADE IN FRANCE
220 - 240V ~ 50 Hz
BRANDT APPLIANCES SAS
7 rue Henri Becquerel
92500 RUEIL MALMAISON
99634202_GB_A.qxd 14/01/05 16:24 Page 23
