57
!
TECHNICAL ASSISTANCE AND SPARE PARTS
!
"
TOUCH ERRORS
Error
Description
Cause
What to do
Err Sc1
Probe detection error, the
oven shuts down
Probe
failure/disconnected
Check
connection/replace
Err Sb1
Boiler probe detection
error, the oven shuts down
Probe
failure/disconnected
Check
connection/replace
"
SOFTWARE PARAMETERS THAT CAN BE CHANGED BY THE
USER
Enter the user parameter menus by pressing 2
and the 3 START
keys at the
same time with the oven OFF.
By pressing the right knob, the following parameters can be changed:
Message
Description
Range
Default
bEEp
Volume Buzzer
01…03
3
dLou
Display luminosity Low
01…15
3
dHiG
Display luminosity High
15…30
30
tbEE
Buzzer duration
05…180
180s
Vent
Fan icon blade number
02…03
3 blades
dEF
Reset default
No - Yes
No
fact
Manufacturer menu password
-50… +50
The desired range can be set by turning the right knob. Confirm by pressing the right
knob to save the new setting and exit the parameters menu.
When the
"dEF"
parameter is confirmed with the value
"Yes"
"
SurE" appears.
Turn and press the right knob again to confirm with
"Yes" to
reset to factory settings.
