Kleenmaid OMF9411 Instructions For Use And Warranty Details Download Page 5

2.

SAFETY INSTRUCTIONS

2.1 Installation

CAUTION!

The appliance must be installed by skilled personnel.

Remove all packaging materials.

Do not install or use the appliance if it is damaged.

Observe the instructions 

included 

with the appliance.

Always take care when moving the appliance as it is very heavy. Always wear safety gloves.

Do not pull the appliance by the handle.

Comply with

 the minimum distance from other appliances.

Make sure the appliance is installed under and near parts adequately anchored to a fixed structure.

The sides of the appliance must remain adjacent to appliances or units with the same height.

The appliance must not be installed behind a decorative door in order to avoid overheating.

2.2 Electrical connection

CAUTION!

All the electrical connections must be made by a skilled electrician.

The appliance must have earthing.

Check that the electrical data on the 

rating

 plate match those of the 

system

. Otherwise, contact

an

 

electrician.

Always use an electric socket with a properly installed protective c

ircuit

.

Do not use multiple sockets or cable extensions.

Make sure you do not damage the plug or the cable. If the power cable needs to be changed, the work

must be done by 

the manufacturer, its service agent or similarly qualified person in order to avoid a

hazard.

Prevent cables from coming into contact or getting near the appliance's door, especially when the door

is hot.

Devices protecting against electric shock must be secured so that they cannot be disabled without using

tools.

Insert the power plug into the socket only at the end of installation. Check that the power plug remains

accessible after installation.

If the power plug is loose, do not connect it to the socket.

Do not pull on the power cable to disconnect the appliance. Always pull on the plug itself.

Use only suitable isolation devices: circuit breakers, fuses (plug fuses must be removed from the fuse

holder), earth leakage circuit breakers and relays.

The electrical system must be equipped with an isolation device which lets you disconnect the appliance

from the power socket at all poles. The isolation device must have a contact opening width of no less
than 3 mm.

This appliance complies with EEC directives.

2.3 Use

CAUTION!

Use the appliance solely in a domestic environment.

Risk of injury, burns, electric shock or explosion.

Do not make any changes to the specifications of this appliance.

Ensure that the ventilation slots are not blocked.

Never leave the appliance unattended during operation.

4

It is necessary to allow disconnection of the appliance from the supply after installation. The disconnection

having the plug accessible or by incorporating a switch in the fixed wiring in accordance 

 can be achieved by 

 with the wiring rules.

Summary of Contents for OMF9411

























Reviews: