Kleenmaid OMF9411, Instructions For Use And Warranty Details

Page: 13 / 24

5. CLEANING AND CARE
CAUTION!
• Refer to the
sections
on safety.
5.1 Notes on cleaning
• Clean the front of the appliance with a soft cloth moistened with warm soapy water.
• To clean the metal surfaces, use a regular detergent.
• Clean the inside of the appliance after each use. Fat or other food remains can cause a fire. The risk is
higher for the baking pan.
• Remove stubborn dirt with special oven detergents.
• After each use, clean the accessories and let them dry thoroughly. Use a soft cloth moistened with warm
soapy water.
• Do not clean non-stick accessories with strong detergents, sharp objects or in the dishwasher. This could
damage the non-stick coating.
• All surfaces can discolour or alter if you use unsuitable products. In particular the front of the oven
may
be
damaged by cleaning sprays and descalers. Remove residual detergent immediately.
• Danger of injury. Steam from an electric household appliance could reach live parts and cause
short-circuiting. Never use a steam appliance to clean the oven.
• Danger of burns! The heating elements must be switched off. The cooking chamber must not be hot.
Products that are not suitable for cleaning and maintenance.
To avoid damaging the
oven
surfaces do not use the following cleaning products:
– detergents containing soda, ammonia, acids or chlorides,
– descaling products on the front of the oven,
– abrasive detergents, such as powders, milk or abrasive pastes,
– products containing solvents,
– detergents for stainless steel,
– detergents for dishwashers,
– detergents for glass,
– detergents for ceramic hobs,
– abrasive brushes and sponges such as steel wool or sponges which still contain residues of abrasive
detergents,
– dirt erasers,
– sharp metal scrapers,
– steel wool,
– oven spray
– stainless steel scouring pads
–
regular cleaning with mechanical products is not recommended
7.
The accessories may get hotter than usual.
8.
The oven can produce an unpleasant odour and smoke.
This is not a malfunction.
9.
Make sure the airflow inside the room is adequate.
1 2