Removing the appliance door
Open the appliance door fully.
Fold open the two locking levers on the left and right
. See Fig. 1 below.
Close the appliance door as far as the limit stop.
With both hands, grip the door on the left- and right-hand side, and pull it out upwards.
1.
2.
3.
4.
Fitting the appliance door
Reattach the appliance door in the opposite sequence to removal.
1.
2.
When attaching the appliance door, ensure that both hinges are placed right onto
the installing holes of the front panel of the cavity.
See Fig. 2 on next page.
Ensure
that the hinges are inserted into the correct position. You must be able to insert
them easily and without resistance. If you can feel any resistance, check that the
hinges are inserted
correctly
into the holes
.
The
locking lever
which is used to lock the hinges to allow the door to be
removed, needs to be returned to the fully locked position
(ie returned to the
horizontal alignment, and then firmly pushed down into final position)
before the
door is again operated. If
this step is not performed correctly damage to the oven
may occur.
See figures 1 & 2 on page 21.
Open the appliance door fully. While opening the appliance door,
confirm that
the
hinges are
in
the right position. If
they are fitted incorrectly
, the appliance door
will not
fully open.
Fold both locking levers closed again
, ensuring that are pushed
all the way down.
Close the cooking compartment door.
Make a final check to ensure
the door is
in
the right position and
that
the ventilation slots are not
obstructed.
3.
1
4.
22
