Kleenmaid LTK95A, Installation Manual

Page: 11 / 22

Installation
9
802116 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Standpipe Installation
Place the drain hose into the standpipe.
Remove the beaded tie-down strap from accessories
bag and place around standpipe and drain hose and
tighten strap to hold hose to standpipe. This will
prevent the drain hose from dislodging from drain
receptacle during use.
Figure 6
Sink Installation
For this type of installation, use the beaded tie-down
strap (supplied in accessories bag) or use a large wire
tie (available from your local hardware store), and
secure the drain hose to the cabinet top hinge (refer to
Figure 7 ). This will prevent the drain hose from
dislodging during use.
Figure 7
FLW2010N
1 61 to 91,44 cm (24 to 36 in.) Recommended
Height
2 Standpipe – 5,08 cm (2 in.) or 4 cm
(1-1/2 in.) Diameter
3 Beaded Tie-Down Strap
FLW2010N
1
2
3
FLW2011N
1 Drain Hose
2 Tie-Down Strap (Wire tie or tape if
necessary)
FLW2011N
1
2