L
N
IMPORTANT
The appliance must be installed by an authorized technician and checked before use. The
manufacturer is not responsible for any damage that might be caused by defective placement,
and installation by unauthorized personnel.
Before making preparations for or commencing installation, the installer should refer to the
current online version of the User Manual, which is available on the Kleenmaid website (see
back cover for details).
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen
unit that are next to the oven must be made of a heat resistant material. Ensure that the
glues of units that are made of veneered wood can withstand temperatures of at least 120
ºC. Plastics or glues that cannot withstand such temperatures will melt and deform the
unit
2
nce the oven has been lodged inside the unit, electrical parts must be
completely insulated. This is a legal safety requirement. All guards must be firmly fixed into
place so that it is impossible to remove them without using special tools. Remove the back of
the kitchen unit to ensure an adequate current of air circulates around the oven. The oven
must have a rear gap of at least 45 mm.
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door
3. Secure the oven to the kitchen cabinet with two
distance holders "A" which fit the holes in the
oven frame and fit the two screws "B".
ELECTRICAL CONNECTION
11
