manualshive.com logo in svg

Kleenmaid FEG 900 X, Instructions For Use Manual

Share
Download
Kleenmaid FEG 900 X Instructions For Use Manual Download Page 17

CAUTION

[

This appliance must be used only for task it has explicitly been designed for, that is for 
cooking foodstuffs. Any other form of usage is to be considered as inappropriate and 
therefore dangerous.

[

Do NOT place combustible materials or products on this appliance at any time.

[

Do NOT spray aerosols in the vicinity of this appliance while it is in use.

USING THE OVEN FOR THE FIRST TIME

[

Clean the inside of the oven with a cloth soaked in water and neutral detergent and dry 
thoroughly.

[

Slide in the catalytic liners and wire racks on the oven wall as in fig. 11.

[

Position the shelf and tray as per fig. 12.

[

To eliminate traces of grease in manufacture it is necessary to pre-heat the oven at the 
maximum temperature:

B

for 60 minutes in the        position, for 30 minutes in the        position and for 
another 15 minutes in the        position.

USE AND CARE

17

Fig. 11

Fig. 12

Summary of Contents for FEG 900 X









































Reviews:

No comments

Brands by name

Popular brands

Load more brands