26
INJECTORS REPLACEMENT
This appliance is suitable for use with Natural Gas or LPG (check the “gas type” sticker
attached to the appliance). The nominal gas consumption and injector size details are
provided in table at page 28.
To replace the injectors it is necessary to lift the cooktop and proceed as follows:
[
Remove the backguard “G” or remove the lid “A” (fig. 24 and 25).
[
Remove pan supports and burners from the cooktop.
[
Unscrew the two screws “B” and remove the sockets (fig. 24 and 25).
[
Unscrew the two screws “C” and remove the two side trims and joints pulling upwards.
[
Pull forwards the hobtop to release it, then lift following arrow “D” (fig. 24 and 25).
[
Hold the hobtop open by a support (fig. 26).
[
Fully raise the adjusting air tube “A” (fig. 27) in order to easily reach the injector.
[
Using a 7mm A/F angled spanner, remove the injector from its housing and replace it
with one suitable for the kind of gas supplied to the appliance(see following tables -
pag.28).
Fig. 24
Fig. 25
Fig. 26
G
V
B
C
B
C
D
C
B
C
D
B
A
Summary of Contents for FEG 600 X
Page 1: ...DUAL FUEL COOKER Instructions for Use and Warranty Details Model FEG 600 X THE WORLD S BEST...
Page 29: ......
Page 30: ......
