
Instructions for use, installation and connection
26
Technical information
Tyre-model
E54U1-E3
FEC500X
E54U2-E3
FEC500W
E54C1-S4
FES500W
Dimensions
(heigh/width/depth) cm
85/50/60 and 90/85-50/60
Hotplate (Ø cm/kW)
HL = HI-Light heater
B = fast hotplate
Rear left
145/1,2/HL
145/1,2/HL
145/1,5/B
Front left
180/120/1,7/HL
180/120/1,7/HL
180/2,0/B
Front right
145/1,2/HL
145/1,2/HL
145/1,5/B
Rear right
180/1,8/HL
180/1,8/HL
180/2,0/B
Oven
Temperature regulator/
function mode switch
1/1
Guide levels
5
Top/bottom heater (kW)
0,9/1,1
0,9/1,1
0,9/1,1
Infrared heater (kW)
2,0
2,0
2,0
Oven illumination (W)
25
25
25
Function modes
Top/bottom heater (kW)
2,0
2,0
2,0
Infrared heater (kW)
2,0
2,0
2,0
Infrared heater with fan (kW)
2,0
2,0
2,0
Hot air/bottom heater (kW)
3,4
3,4
3,4
Hot air (kW)
2,2
2,2
2,2
Defrosting (W)
50
50
50
Bottom heater/fan
1,1
1,1
1,1
Bottom heater (kW)
1,1
1,1
1,1
Max. temperature
275 °C
Electric connection
415 V 3N~,
Nominal voltage of heaters
240 V, 50 Hz
Total connected power (kW)
9,3
9,3
10,4
Oven total (kW)
3,4
3,4
3,4
Hotplates total (kW)
5,9
5,9
7,0
After sale service
Repairs
If you find your cooker malfunctioning and
requiring repair, contact our nearest service
center and quote the code and the type or
model of the appliance.
Attached is the list of service centers with
addresses and phone numbers.
Important!
Before contacting the service center, check if you
can repair the malfunction, using the instructions
from the Troubleshooting guide section.
If the malfunction of the appliance was caused by
the improper use, the service visit during the
warranty period is not free of charge.
Save these instructions and keep them
always handy. In case you sell the appliance,
give the instructions to the new owner.
Rating plate
Rating plate is located at the bottom on the side
when you open the oven door.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO
INFLUENCE ON THE OPERATION OF THE APPLIANCE.