78
EN
ADDITIONAL FUNCTIONS AND KEY
COMBINATIONS
Power Saving Function
In cooling mode, press the TEMP and CLOCK buttons simultaneously to turn the power
save function on or off. Once the power save function has been started, [SE] will be
displayed on the remote control and the indoor air conditioner will automatically adjust
the set temperature to the factory setting for the best energy saving effect. Press the
TEMP and CLOCK buttons simultaneously again to exit the power save function.
• In energy saving mode, the fan speed is set automatically and cannot be adjusted.
• In power save mode, the set temperature cannot be changed. If you press the
TURBO button in this mode, the remote control will not transmit the signal.
• Sleep function and energy saving function cannot be activated at the same time. If
you have activated the power save function in cooling mode, it is deactivated again
by pressing the SLEEP button. If the sleep function has been activated in the cooling
mode and the power save mode is started, the sleep function is deactivated.
Heating Function
In heating mode, press the TEMP and CLOCK buttons simultaneously to switch the 8 °C
heating function on or off. Once this function is started, the remote control will display
and [8 °C] and the air conditioner will maintain the heating status at 8 °C so that
the room temperature cannot fall below 8 °C. The heating status will then be displayed
on the remote control. To exit the 8 °C heating function, press the TEMP and CLOCK
buttons simultaneously again.
•
If the 8 °C heating function has been activated, the fan speed is set automatically
and cannot be adjusted.
•
If the 8 °C heating function has been activated, the set temperature cannot be
changed. If you press the TURBO button in this mode, the remote control will not
transmit the signal.
•
The 8 °C heating function and the sleep function cannot be activated at the
same time. If you have activated the 8 °C heating function in cooling mode, it is
deactivated again by pressing the SLEEP button. If the sleep function has been
activated in cooling mode and the 8 °C heating function is started, the sleep
function is deactivated.
•
The 8 °C heating function is displayed as 46 °F heating function in the Fahrenheit
setting.