24
EN
TROUBLESHOOTING
Problem
Possible Cause
Solution
symbol is lightening on
and the arrow flashes.
Lack of Water.
Stop the ice maker, fill
water, and press “ON/
OFF” button again to
restart the unit.
symbol is lightening
and letter “F” flashes.
There is too much ice.
Suggest you to obtain the
ice-cube.
No ice cube inside.
Remove the probable
obstacle inside or clean
the inside wall of the ice
storage, if still can’t start
to ice making process,
press “SELECT” for more
than 5 seconds to run the
ice making for 10 cycles
at most.
Errorcode
Ambient temperature
sensor breakdown
The unit can still work,
but suggest to call the
manufacturer service man
or electrical technician to
change to a new sensor.
Errorcode
The ice-making box can
not reset normally.
Call the manufacturer
service man or qualified
technician to check the
problem.
Ice cubes on the evapora-
tor stick together.
The ice cycle is too long.
Stop the ice maker,
and restart it after the
ice blocks melt. Select
the small size ice cube
selection.
Water temperature in inner
tank is too low.
Change the water in the
inner Tank. Temperature of
water is better set between
7℃-32℃ .