Klarstein Cubix 10032104, Manual

Page: 24 / 28

24
EN
UV function
Touch the symbol UV to turn on the UV function. The LED display shows the symbol
Touch again to stop the function. The UV function serves the disinfection of the water.
Einstellung der Nebelstärke
Slide the symbol MAX-MIN . All auto modes are cancelled. You may
select 7 desired levels of mist volume. The corresponding slider symbol and mist output
level will appear on the display. Slide to adjust the backlight and base’s brightness. 5
seconds after setting mist output speed, the current room humidity will also appear on
the display.
Automatic shut-off
Once the water in the basin is too low to keep the unit operating, the unit will
automatically stop. The LED shows the symbol for low water
. Refill the water, and the
unit will restart. If don’t refill water within 15 minutes, the unit will automatically power
off.
Remote control
The identical symbols on the remote control also control the same functions.
Sleep mode
No matter in what mode, when the relative humidity reaches 90%, the unit will enter the
sleep mode. When the relative humidity is under 85%, the unit will once again activate.
Automatic display switch-off
No matter which mode the unit is operating in, if no action is taken, after about 15
seconds, the backlight for the control buttons and the display will dim.