19
EN
OPERATION
Before use
• Upon First Operation, allow the unit to sit at room temperature for half of an hour
before running.
• It is recommended to operate the unit below a temperature of 20 °C and a relative
humidity of less than 80% RH.
• Use clear water not over 40 °C
• Check the water basin to make sure it is clear.
Operation
1.
Put the unit on a flat surface.
2. Fill the water into the water tank, and then tighten the tank cover. Note: Fill the
water tank via the opening or the lid on the underneath.
3. Put the water tank on the main base, and disable the child safety lock.
4. Check if the rated voltage is the same as the input voltage, and plug into the socket.
The symbol ON/OFF will be lit.
5. Touch the symbol ON/OFF on the unit. All function button will be backlit and the
background LED light will be on. The unit will begin to work in AUTO mode. Display
shows AUTO symbol, current temperature, current humidity and the vapor output
level symbol.
6. Touch the MODES ,symbol to select night mode, health mode and auto mode.
Night mode
• Display shows the night mode symbol l . The device determines the optimal
humidity using the formula in auto mode and begins operating to achieve it at
maximum power.
• When the current humidity is less than the humidity shown in the table, high speed
operation. When the target humidity has been reached, the unit will switch to
minimum power.
Air temperature
Humidity
≤19 °C
65 %
20 °C
60 %
21 °C
58 %
22 °C
57 %
23 °C
55 %
24 °C
53 %
25 °C
50 %
Summary of Contents for Cubix 10032104
Page 1: ...10032104 Cubix Luftbefeuchter Air Humidifier ...
Page 2: ......
Page 27: ......
Page 28: ......
