20
EN
CONTROL PANEL AND KEY FUNCTIONS
Start device / Standby mode
Insert the plug into the socket. You will hear a beep and all indicators will light for 2
seconds and then go out again. After that the device is in standby mode.
Key
Function
ON/OFF
In standby mode, press the ON/OFF button to start/stop the
unit. The default wind speed is [1].
Speed
The wind speed can be adjusted in 4 steps. Press the SPEED
button several times when the power is on to set the desired
wind speed. The lights above the button indicate the current
wind speed.
Timer/Preset
Timer: When the device is switched on, press the TIMER
button several times to set the time after which the device is
automatically switched off. The timer can be set from 1-15
hours. The lights above the button indicate the currently set time.
If several lights are lit, add the values of the lights to determine
the currently set time (example: If 15 hours are set, the values
1+2+4+8 are lit).
Preset: In standby mode, press the TIMER key several times to
set the time after which the device is automatically switched on.
The timer can be set from 1-15 hours. The lights above the button
indicate the currently set time. If several lights are lit, add the
values of the lights to determine the currently set time (example:
If 15 hours are set, the values 1+2+4+8 are lit).
