Klarstein 10041826, Manual, Page: 51 / 168

51
EN
FILLING THE RINSING SALT DISPENSER
1. Remove the dish insert and unscrew the cover of the container.
2. Insert the bottom of the funnel (included) into the hole and pour in about 1 kg of
dishwashing salt.
3. Fill the salt container to the top with water before using the appliance for the first
time. It is normal for a small amount of water to leak out of the salt container.
4. After filling, screw the cover firmly back onto the container.
5. After the salt container has been filled with salt, the warning light goes off.
6. A cleaning programme should be started immediately after the container has been
filled with salt. (We recommend using a short programme.) Otherwise, the filter
system, the pump or other appliance components may be damaged by the salty
water. In such cases, the warranty claim becomes invalid.
Please note:
• The salt only needs to be topped up when the salt warning light comes on.
Depending on how well the salt dissolves, the salt warning light may remain on for
some time after the salt container has been filled. If your appliance does not have
such a warning light (on some models), you can estimate the moment when you
need to refill the salt depending on the frequency of use of the dishwasher.
• If salt has spilled, run a quick programme to remove it.