33
EN
Note:
If you activate the cooling mode and there are less than 2 litres in the water
tank, an alarm signal sounds - even in sleep mode.
Setting wind speed
Press the speed button (20) to set the desired fan speed as follows:
•
If you press the On button (21), the fan runs at a low speed by default, the LED
indicator for fan speed Low (32) flashes.
•
If you press the speed button (20) once, the fan runs at medium speed, the LED
indicator for fan speed Medium (31) flashes.
•
Press the speed button (20) twice to set the high speed, the LED indicator for fan
speed High (30) flashes.
Setting the start timer
If the air cooler is in standby mode, you can set the start timer with the timer button (18).
The timer can be activated in all operating modes. You can set the timer in 1-hour steps
from 1 to 15 hours.
Press the timer button (18) several times in standby mode to set the start time in the
following order:
The hour LEDs for the start timer light up as follows:
TIME
1 h 2 h 3 h 4 h 5 h 6 h 7 h 8 h 9 h 10 h 11 h 12 h 13 h 14 h 15 h
1 h LED
√
√
√
√
√
√
√
√
2 h LED
√
√
√
√
√
√
√
√
4 h LED
√
√
√
√
√
√
√
√
8 h LED
√
√
√
√
√
√
√
√
Setting the off timer
If the air cooler is switched on, you can set the off timer with the timer button (18). The
timer can be activated in all operating modes. You can set the timer in 1-hour steps from
1 to 15 hours.
