25
EN
• With each and every change of tank content, completely remove residual water
from the equipment. To prevent nucleation, remove residual water from the
equipment and water tank every time after three days of use.
WARNING
Risk of electric shock! Work on the electrical components may only be
carried out by an authorised specialist company!
PRODUCT DESCRIPTION
The air cooler lowers the room temperature to a comfortable degree by ventilating
cooling. The appliance is filled with cold water or optionally with ice cubes and/or ice
packs in order to cool down the incoming warm air at the filter and to blow out the cold
air thus generated via the fan.
Besides its cooling function, the appliance can also be used for air freshening: thanks to
an integrated air filter and the filter’s honeycomb structure, the sucked-in air is filtered.
The fan speed can be set to three stages. The discharge direction of the cooled air can
be manually adjusted via the ventilation flaps as well as via the optionally selectable
automatic swing mode.
The appliance has a night mode enabling ultra-silent operation at bedtime. The
appliance can be operated via the control panel at the appliance or via the infrared
remote control.
Moreover, using the timer function, the appliance can be switched off automatically with
time delay. The appliance is equipped with an overheating protection that switches off
the air cooler in case of overheating.
Note on using the water tank
In principle, you can use your air cooler at any time without water in the tank. It will then
work like a normal fan. Water in the tank is only needed for the cooling function. The
air cooler evaporates this through the nebulizer flow, removing heat from the air and
reducing the air temperature of the fan by up to 3 °C, depending on the coldness of the
water used. We advise against using the cooling function on days with particularly high
humidity, as it increases this further and can thus contribute to circulatory problems.
