Klarstein 10035167, Manual

Page: 31 / 84

31
EN
TIMER SETTING
Description
There are up to 9 possible settings for the timer. Each setting point has its date, its switch-
on and switch-off time. The maximum duration of each set point is 23 hours 50 minutes.
The setting date can be any day or several days of a week. The date in each setting
point represents the date of the switch-on time. If the off time of the setting falls on the
second day, it is not necessary to set the date, you only set the off time
Steps to display the timer setting
Press the TIMER SET button. Press [+] or [-] to check the on time of the timer one by one.
To check the switch-off time, press the key . Press the [+] or [-] key to continue the
display. To delete the current setting item, press C to delete
Steps for setting the timer
(I) Select serial number setting
Press the TIMER SET button and the serial number starts flashing. Press the [+] or [-]
button until you reach the serial number you want to set or change.
(II) Select date
Press the TIMER SET button again and the cursor on the left side of the day will start
flashing. Press the or buttons to move the cursor to the corresponding day. Press
[+] to add the corresponding day, or press [-] to delete the day until you have finished
selecting all the data.
(III) Setting the Start Time
If you continue to press the TIMER SET button, the hour will start flashing. Press the [+] or
[-] button to set the hour. If you keep pressing the TIMER SET button, the minute will start
flashing. Press [+] or [-] to adjust the minute.