Klarstein 10032506, Manual

Page: 27 / 36

27
EN
DRAINAGE INSTRUCTIONS
Manual drainage
1. When the machine stops after the water is full, turn off the machine power and
unplug the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the water pan at
the bottom of the body.
2. Place the water container below the side water outlet behind the body.
3. Unscrew the drainage cover and unplug the water plug, the water will
automatically flow into the water container.
Notes:
Keep the drainage cover and the water plug properly. During drainage, the body can
be tilted slightly backwards. If the water container cannot hold all the water, before the
water container is full, stuff the water outlet with the water plug as soon as possible to
prevent water from flowing to the floor or the carpet.
4. When the water is discharged, stuff the water plug, and tighten the drainage cover.
Notes: 1. Restart the machine after the water plug and drainage cover are installed,
otherwise condensate water of the machine will flow to the floor or the carpet.
Continuous drainage
(only applicable to dehumidifying mode)
1. Unscrew the drainage cover, and unplug the water plug.
2. Set the drainage pipe into the water outlet.
3. Connect the drainage pipe to the bucket.
CLEANING AND CARE
Before cleaning and maintenance, turn off the machine and unplug the plug..
Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will be
damaged or even the whole machine will be damaged.
Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is
reduced, be sure to clean the filter screen once every two weeks.
Clean the upper filter screen frame
1. Clasp the wedging block of the EVA filter screen frame with hands. Force down