Klarstein 10032506, Manual

Page: 24 / 36

24
EN
1. First operation
When the machine is powered on for the first time, the buzzer will shout, and then
the machine will get into standby status.
2. Power Key
Press the key to turn on and turn off the machine. In the case of power on, press the
key to turn off the machine; in the case of power off, press the key to turn on the
machine.
3. Mode Selection Key
In the case of power on, press the key to switch between
cooling
 dehumidification  fan  heating (single cold with no such
function)  cooling etc. mode
4. Up Key and Down Key: press the two keys to change the setting temperature or
setting time, operate as follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5. Wind Speed Selection Key
Press the two keys to change the setting temperature or setting time, operate as
follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
6. Timing Key
In the case of power on, press the key to close timing; in the case of power off,
press the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down
by one hour..
7. Sleep Mode
In the cooling mode, press the UP and fan key to turn on the sleep mode, then the
unit will work on energy-saving type.
Note
• Cannot turn on the sleep mode in the dehumidifying or Fan mode!
• The water-full lamp will turn on and buzzer will alarm for several seconds, the
compressor will stop to work when the inner unit chassis water is full.