Klarstein 10031700, Manual

Page: 19 / 36

19
EN
the coffee/steam knob by turning the coffee/steam knob again to the

position.
The pre-heating is finished.
Make Espresso Coffee
1. Remove the metal funnel by turning it in clockwise, set steel mesh into metal funnel.
Add coffee powder to steel mesh with measuring spoon, a spoon coffee powder
can make about a cup of top-grade coffee, then press the ground coffee powder
tightly with the tamper.
2. Then insert the funnel into the appliance from the “Insert” position and release
the press bar, and you can fix them into coffee maker firmly through turn it
anticlockwise until it is at the lock position.(See fig. 1).
3. Pour out the hot water in the cup. Then place the hot cup (your cup) on removable
cup shelf.
4. At the time, the green indicator is illuminated, once the green lamp is illuminated,
you should turn the coffee/steam knob to the position, waiting for a moment,
there will be coffee flowing out.
Note: During brewing coffee or making steam, it is normal that the green indicator is
likely to extinguish, it only means that the heater is heating up to keep the temperature at
the standard range.
5. You should press and release the ON/OFF button to the higher position which is
the “OFF” position manually when desired coffee is obtained or the colour of coffee
changes weak obviously, the power indicator and ready indicator go out and the
coffee maker stops working, your coffee is ready now.
Note: Do not leave the coffee maker unattended during making the coffee, as you need
operate manually sometimes. manually sometimes!
6. After finishing making the coffee, you can take the metal funnel out by turning it
clockwise, then pour the coffee residue out with the steel mesh pressed by press bar.
7. Let them cool down completely, then rinse under running water.
Make Cappuccino
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
Note: during making steam, the metal funnel must be assembled in position.
Method:
1.
Prepare espresso first with container big enough according to the part “MAKE
ESPRESSO COFFEE”.
2. Turn the coffee/steam knob to the “ ” position, waiting for until the green indicator
is illuminated.
3. Fill a jug with about 100 grams of milk for each cappuccino to be prepared, you
are recommended to use whole milk at refrigerator temperature (not hot!).
Note: In choosing the size of jug, it is recommended the diameter is not less than
70±5mm, and bear in mind that the milk increases in volume by 2 times, make sure the
height of jug is enough.
4. Insert the plastic sleeve into the milk about two centimetre, then turn the coffee/