50
9
TEMP button
Press this button allows you to the see indoor set temperature, indoor ambient temperature or outdoor
ambient temperature on indoor unit’s display. Temperature is set circularly by remote controller as below.
no display
• When selecting
no display
by remote control or no display, the temperature indicator on indoor unit displays set
temperature.
• When selecting
no display
by remote control, the temperature indicator on indoor unit displays indoor ambient
temperature.
• When selecting
no display
by remote control, the temperature indicator on indoor unit displays outdoor ambient
temperature.
Notes: Outdoor ambient temperature display may can’t be selected for some models. When ndoor
unit receives
no display
signal, it displays indoor ambient temperature. Only for the model whose indoor
unit have dual-8 display.
10 TIMER
• Timer off
: At ON status, press this button once can set TIMER OFF. The character of HOUR and OFF will
flash. Press + or - button within 5s to adujst the time of TIMER ON. After each pressing of "+" or "-" button,
time will increase or decrease half an hour. When holding "+" or "-" button, 2s later, the time will change
quickly until to reach your required time. After that, press the TIMER button to confirm it. The character of
HOUR and FLASH will not flash any more. Cancel TIMER OFF: Press "TIMER" button again under TIMER
OFF status.
• Timer on
: At OFF status, press this button once can set TIMER ON. Please refer to TIMER off for detailed
operation.
Time setting range: 0.5-24 hours.Time interval between two operations can’t exceed 5s. Otherwise,
remote controller will exit the setting status automatically.
11 TURBO
When pressing this button under cooling or heating mode, air conditioner will enter into quick cooling or quick
heating mode. The character of "TURBO" is displayed on remote control. Press this button again to exit turbo
