Cleaning the Door
To clean door, use only a soft warm, damp rag. To prevent penetration of water into the door lock do not
use a spray cleaner of any kind. Also, never use abrasive cleaners or scouring pads on the outer surfaces
because they will scratch the fi nish. Some papers towels can also scratch or leave marks on the surface.
How to Keep Your Dishwasher in Shape
•
After every wash: Turn off the water supply to the appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
•
Remove the plug: Before cleaning or maintenance, always remove the plug from the socket.
•
No solvents or abrasive cleaning: To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Use only a cloth and warm soapy water. To remove
spots or stains from the surface of the interior, use a cloth dampened with water and a little white
vinegar, or a cleaning product made specifi cally for dishwashers.
•
When You go on holiday: It is recommended that you run a wash cycle with the dishwasher empty
and then remove the plug from the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer.
•
Moving the Appliance: If the appliance must be moved, try to keep it in the vertical position. If
absolutely necessary, it can be positioned on its back.
•
Seals: One of the factors that cause odors to form in the dishwasher is food that remains trapped
in the seals. Periodic cleaning with a damp sponge will prevent this.
Troubleshooting Tips
Error codes
When some malfunctions happen, the appliance will display error codes to warn you.
Code
Bedeutung
Mögliche Ursache
E1
Door open
The door is opened when the dishwasher is operating
E2
Water inlet
Water inlet malfunction
E3
Water drainage
Water drainage malfunction
E4
Temperature sensor
Temperature sensor malfunction
E5
Overfl ow/leakage
Overfl ow occurs/Water leakage occurs
E6
Water leakage
Water leakage occurs
E7
Heating element
Abnormal heating
E8
Water diversion system
Water diversion system malfunction
WARNING
If overfl ow occurs, turn off the main water supply before calling a service. If there is water
in the base pan because of an overfi ll or small leak, the water should be removed before
restarting the dishwasher.
Fehlerbehebung
Reviewing the charts on the following pages may make you be free of calling for service:
Problem
Possible causes
What to do
Dishwasher
doesn‘t run
Fuse blown, or the circuit
breaker acted
Legen Sie den Sicherungsschalter um, drehen Sie die Siche-
rung rein oder ersetzen Sie diese.
Power supply is not turned
on
Vergewissern Sie sich dass das Gerät eingeschaltet und die
Tür fest geschlossen ist. Stellen Sie sicher, dass der Stecker
in der Steckdose steckt.
Water pressure is low
Prüfen Sie ob der Wasserhahn voll aufgedreht ist und alle
Verbindungsschläuche angeschlossen sind.
36
