Humidity sensor
In the movement process, this device is used for induction clothing humidity, it me-
ans that it must be carried on cleaning. Major cause of clean is must scour out the
calcium oxide boiler which on the sensor surface up. Clean the sensor in the tumbler.
Lamp replace
1. Open the door,put your hand into the drum of a clothes dryer, use screw driver
unscrew two pieces of screw and take out lamp screen.
2. Take out the bulb by turning counterclockwise. Be carefully.
3. According to installs new bulb with its reverse direction’s process.
4. Catch the lamp screen by hand and hard push counterclockwise, until the bulb
has loosened.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before conacting your local Service Centre, please carry out the
checks listed underneath.
During machine operation it is possible that the Start/Pause pilot light fl ashes to indicate that the
machine is not working. Once the problem has been eliminated, press the Start/Pause button to
restart the programme. If after all checks, the problem persists, contact your local Service Center.
Malfunction
Possible cause
Solution
Dryer does not work
Main plug is not plugged in.
Plug in all main sockets.
Loading door is open.
Close loading door.
Start button hasn‘t been pressed. Press the Start button again.
Drying results
unsatisfactory
Wrong programme selected.
Select a different programme the
next time you dry.
Filter clogged.
Clean lint fi lter.
Incorrect volume of laundry.
Observe recommended loading
volumes.
The sediment on humidity sensor. Washed humidity sensor surface.
Drum light does not
work
Light bulb is defective.
Replace light bulb.
Drying cycle ends
shortly after
programme starts
Not enough washing loaded
Load more washing.
Washing loaded is too dry for
selected programme.
Select higher lower level (e.g.
Heavy instead of Strong)
Drying cycle lasts an
unusually long time
Load volume is too big.
Reduce load volume
IMPORTANT
If you are unable to identify or solve the problem, contact your local Service centre. Before
telephoning, make a note of the model, serial number and purchase date of your machine,
the Servie Center will require this information..
22
