Klarfit 10032654, Manual

Page: 9 / 32

9
EN
SAFETY INSTRUCTIONS
• Read these operating instructions carefully and make sure that you fully
understand the instructions for assembly.
• Carefully inspect the packaging and make sure all parts are complete.
• Never use the bar if parts are missing.
• Before each use, make sure that all screws and bolts are properly
tightened and that nothing is protruding in the training area.
• This bar has been designed so that it tilts when too much force from the
side is used, as this will help you to improve your balance and technique.
• Do not use the bar for gymnastics or other exercises where the full load
and weight is on the bar.
• In particular, other fitness programs that are more strenuous and
require pushing, pulling, or full weight bearing cannot be withstood by a
freestanding ballet bar.
• There is an iron bar (D) designed to balance this bar.
• Do not step, stand or sit on the iron bar (D) as this may cause personal
injury and / or property damage.
• Consult your doctor before starting a training or fitness program. This is
especially important if you are over 35 years old, have never exercised, are
pregnant, or have a disease or back injury.
• Children should always be supervised by an adult while exercising.
Returns for the following reasons are not accepted:
1. Components that have been damaged during use or assembly because
they have not been utilized in accordance with the manufacturer‘s
instructions.
2. Storage in improper places and no use of original parts for assembly.
3. Dirt deposits, scratches, peeled powder coating, etc. after normal use or
during assembly.
4. Any damage incurred during the delivery process or when the package is
opened after purchase.
5. Damage caused by natural disasters such as floods, earthquakes or other
acts of God.
PRODUCER
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.